BULLBIKE - The Biggest Bike Shop in Hong Kong. | About Us

Maintenance

要保持閣下的單車處於良好狀態,需要定時作出合適的保養或維修。我們提供不同程度的保養維修方案,我們機械組的同事更會給你專業的建議。

Services for Bike Cleaning

Services for Bike Cleaning

Service Pricing Service Include Service Time
Bike Cleaning (Full) HK$ 1180 包括全車打散、清洗、檢查、上油、調整及磅數跟進 6 hours
Wheelset and Cassette Cleaning HK$ 300 包括清潔及變速調整 (不包軸承清洗) 2 hours
Frame Cleaning and Waxing HK$ 250 在不打散組件情況下為車架清潔及打臘 1 hour
Bottom Bracket Cleaning
Front Derailleur Cleaning
Crank Cleaning
Rear Derailleur Cleaning
HK$ 150 按需要包括清潔、上油、調整等 1 Hour each
Chain Cleaning
Cassette Cleaning
HK$ 100 按需要包括清潔、上油、調整等 1 Hour each

Services for Wheels

Services for Wheels

Service Pricing Service Include Service Time
Wheel Composition (Each) HK$ 350 包括手工費,軨支長度計算,張力測量 3 hours
Hub Full Service (Each)
Replacing Bearing (Each)
Tubular Tire Install or Uninstall Using Cement (Each)
HK$ 200 按需要包括檢查、調整、清洗、更換服務等 (單輪如要拆舊換新,需多收 $200,不包物料) 3 hours
Wheel Fixing (Each) HK$ 150 包括基本檢查及調整,張力測量 2 hours
Replacing Cassette Body
Replacing Downhill Tire
Applying Tire Sealant
No-tubes Kit Installation
Tubular Tire Install or Uninstall Using Tape (Each)
HK$ 100 按需要包括調整、更換等 (單輪如要拆舊換新,需多收 $100,不包物料) 1-2 hours
Hub Adjustment (Each)
Replacing Tire (General) or Inner Tube (Each)
HK$ 50 包括基本調整 Half an hour

Services for un/installation & Adjustment

Services for un/installation & Adjustment

Service Pricing Service Include Service Time
Incoming Component Installation HK$ 950 包括全車散件組裝,上油,調整及磅數跟進 (不包清洗服務)
*只適用於總金額少於$5,000 組裝車的產品
5 hours
Bike Installation – Normal HK$ 650 包括全車散件組裝、上油、調整及磅數跟進 (包清洗服務)
*只適用於總金額少於HK$30,000但多於$5,000 組裝車的產品
5 hours
Bike Packing HK$ 650 提供紙箱及車架保護泡綿,包括標示原來設定及分拆入箱 (單買紙箱$250) 2 hours
Bike Installation – Supreme HK$ 450 包括全車散件組裝、上油、調整及磅數跟進 (不包清洗服務)
*只適用於總金額超過HK$30,000 組裝車的產品
5 hours
Replacing Bearing (MTB Frame) HK$ 400 4 hours
Car Top Rack Install/Repair HK$ 400 2 hours
Incoming Factory Bike Installation HK$ 350 包括盒裝全新成車或包裝入箱後再次重組的成車 3 hours
Bike Decomposition HK$ 350 包括全車部件分拆及基本清潔 2 hours
Replacing Gear or Brake Cable Set(DA x 1) HK$ 250 包括物料、手工費、更換線組及調整 1 hours
Basic Checking HK$ 200 包括初步檢查 Half an hour
Brake Installation (Single) HK$ 200 包括安裝、CUT線、打油 2 hours
Installing Crank
Installing or Replacing Bearing (BB)
Installing Front Derailleur with Adjustment
Installing Rear Derailleur with Adjustment
Brake Lubrication (Single)
Replacing Gear or Brake Cable Set(General x 1)
Rear Rack Install/Repair
HK$ 150 按需要包括安裝、調整、更換、打油等 1-2 hours
Installing Brake Caliper/Disc Rotor (Single)
Installing Cassette with Adjustment
Installing Handle Bar or Stem
Handle Bar (Internal Route)
Fork Cutting
Replacing Gear or Brake Cable Core & Hose (Single)
HK$ 100 按需要包括安裝、調整、裁切等 0.5-1 hours
Installing Brake Pad (Pair)
Shifter or Brake Adjustment
HK$ 50 按需要包括安裝、調整等 0.5-1 hours